Sliding Patio Doors Repairs

Your sliding patio doors will bring the outdoors in to your home and improve its energy efficiency. As time passes, they could begin to show signs that need some attention.

Luckily, most of the problems with sliding Patio Doors Repair doors are fairly simple to address. Learn more about how you can keep your patio door repair service near me doors looking and operating like new:.

Dirty or damaged tracks

The tracks of your sliding patio door could be dirty or clogged. Over time, dirt and grime of daily usage can accumulate on the track. This can cause the jam to break or even break completely.

Including regular light cleaning of sliding doors and tracks in your chores at home can help minimize this accumulation. Begin by cleaning large debris off the tracks. Then make use of warm water and non-abrasive cleaning products, such as dish soap, to clean them. Vinegar can be added to your cleaning solution to help remove stubborn grease and dirt staining.

If your sliding door not working smoothly after you've followed these steps, this could be a sign there is more serious damage. This may require a professional to repair or replace the door. There are a few basic solutions you can try before calling a professional to avoid costly repairs or replacements.

Place a mat under your sliding doors. This will assist in catch dirt before it gets to the tracks. Make sure to trim the plants and shrubs that are located near your sliding door to limit the amount of debris tracked into the tracks. Close the door correctly to ensure that you don't damage the rollers or wheels. By keeping your doors clean and lubricated, you can prolong their lifespan significantly.

Rollers that are misaligned

Occasionally the sliding patio doors repair patio door becomes out of alignment or becomes stuck. Most often, this is due to dirt or other obstructions that can be easily fixed. However, it can also be the result of a bent track or roller. In the latter scenario it is possible to realign the roller by extracting them with the adjustment screws and cleaning them with ruby alcohol. These parts can be fragile.

If your doors remain stuck then you could try applying lubrication to the rollers to decrease friction and make it easier for them to slide. It is best to use a silicone-based lubricant, because petroleum-based lubricants can attract dirt faster. It is also essential to clean the tracks and rollers prior to applying lubricant.

After you've cleaned the rollers, you can reinstall them with the adjustment screws. Use the same lubricant you used to clean them. When you are reinstalling the rollers ensure that you push them all the way into their channels. Then, you can test your door to see if it now slides smoothly.

If the problem continues it could be necessary to uninstall your door and examine the rollers and tracks for any more serious issues. If the tracks or wheels are bent in a way it could be necessary to replace them. In this case, it's a good idea to get an expert to install the tracks.

Warped Glass

Sliding glass doors are ideal to bring in natural light and the outdoors into a space, but they are also susceptible to damages that require repair or replacement. The most frequent issues that can occur are warping, cracking and fading. Warping happens when the materials that comprise your sliding glass patio door begin to degrade due to exposure to sun, heat and other environmental factors. Cracking is often caused by impacts, such as a lawnmower or ball smacking into the door. Fading typically occurs due to repeated exposure to sunlight and other elements.

If your sliding patio doors aren't easy to close or open it could indicate that the tracks and rollers are not functioning correctly. This could be due to accumulation of dirt, rust or debris in the track, wheels that are not aligned or an absence of lubrication. This issue can be fixed by regularly cleaning the tracks, rollers and clearing obstructions.

Another reason that sliding patio doors may be difficult to open or close is that the locking mechanism has become faulty. This could be due to the alignment of the track or wear and tear but a simple fix is to adjust the locking mechanism by using the adjustment screws located on the bottom of the track.

Air leaks or drafts around your sliding patio door are a frequent problem that can reduce the efficiency of your home's energy usage. They are usually caused by damaged weather stripping and an improper alignment of the door that is easily fixed by replacing the old weather stripping and re-aligning the doors.

Loose Handle

It can be a hassle when the handle of a sliding door becomes loose. It makes it difficult to open. This problem is usually caused by an incorrectly aligned locking mechanism which can be corrected by loosening the screws that hold it in place and tightening them until they are snug against the door jamb.

A loose handle can also result from the handle becoming detached from the spindle connecting it to the inside or handles outside. This is often caused by a variety of factors including excessive use, wear-and-tear or just general aging. If the problem is not addressed quickly, it could eventually lead to the whole handle becoming loose and possibly falling off completely.

To fix this problem to fix it, you must first identify the screws that join the interior and exterior handles. They are typically hidden behind tabs made of plastic which can be removed using a flathead (or a Phillips head screwdriver in some instances) screwdriver. Securely store these screws to prevent them from being lost.

Once the old handles have been removed and the old handles are gone, the next step is to take off the spindle that is loose. This can be accomplished by tapping the spindle with a mallet or hammer until it comes loose from its place inside the door. The new handle is then fitted by putting the spindle into the hole for the handle inside and the other end through the hole in the handle on the outside. After the handle is installed then tighten it by screwing back the screws. Then, test to ensure the lock and unlock mechanism functions properly.

Faulty Weatherstripping

Weatherstripping that's damaged or cracked may allow water and air to be able to seep into your patio door, causing damage to your home's comfort and energy efficiency. In addition to allowing moisture, it could create drafts and also increase your cooling or heating costs. The good news is that replacing the weatherstripping is an easy fix that doesn't require professional assistance. You can remove the old weatherstripping by either loosing the staples with a screwdriver, or gently prying it off with a putty knife and pulling it away from the door. Then, you can wash the area and apply a new layer of weatherstripping that is backed by a foam seal that helps stop leaks and improve the comfort.

If your sliding patio door is not functioning as it should, you need to fix the problem immediately to prevent further damage and to keep them functional for many years to be. Depending on the severity of the issue, DIY or professional repair/replacement may be the best solution.

Most sliding patio door repair company door problems are caused by dirty rollers, faulty tracks, and an untidy handle. These issues are usually addressed by regular cleaning and maintenance including changing the track's lubricant and adjust, and tightening the hardware. If these solutions don't work, you should seek out professional help to make sure that your patio is working exactly as it should. Before you decide to replace or repair your patio door, be certain to verify its warranty information to ensure that it is covered by the manufacturer's warranty. This will save you money in the future on repairs and replacements.