Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. If you have double glazed window repairs-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is large, you might need to consider security screens that includes a window repair. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may develop a variety of issues, including sagging. A sagging window can cause problems with light, draughts or even security. It's important to take action as soon as you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need to open the window to get to the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you are unable to move the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corners of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Based on the severity of the issue the caulking used previously may require removal before a new layer is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed window repairs-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be corrected by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze It could be hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is essentially a very simple process, but it's easier to do when you have a person to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you suggestions.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also be unbalanced due to wear, causing a gap where the sash and frame meet. If they are damaged beyond repair, it might be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it's feasible to give them a clean but in some instances it could be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is essential to remember that all windows eventually wear out and it may be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult an expert as soon as you can.