Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai has a distinctly SUV feel to it thanks to its larger dimensions. Additionally, the ride on 19-inch wheels in Ti and ST-L models may be a bit stiff at times. The front tyres on the Qashqai are also prone to losing traction on rough surfaces, and the CVT may occasionally display a wrist-flexing torque steering.

This is usually caused by an unresponsive battery, which can be replaced in a matter of minutes. Be sure that the replacement battery has the same size, voltage and specifications.

Water Damage

One of the main reasons a nissan replacement key key fob will give the "key ID is not correct" message is due to water damage. The key fob comes with rubber seals that protect the electronic chip inside, but prolonged exposure to moisture can cause it to stop functioning properly. This is usually the case when you drop your key fob into the ocean or in a swimming water pool, but it could also happen if it gets wet due to soapy hands or rain.

If your key fob was exposed to water for a long period of time then you might need to clean it using isopropyl or electronic cleaner. Alternatively, it might require the attention of an expert to repair or replace it.

If your key fob does need to be replaced, the procedure is relatively easy. First, make sure that you have an appropriate multipack battery (CR2032 3V). Then, you can open the front and back cases using the small flathead screwdriver. You'll need to remove the clips for retaining metal and pull out the battery that was in place, and then insert the new one. Reassemble the fob and replace the mechanical key. Verify that it is working correctly. If not it, you'll need to bring it to a nissan gtr key fob dealer or professional auto locksmith to replace the chip in the key. Fortunately the chip isn't often damaged by water exposure and this shouldn't be a major expense.

Dead Coin Battery

The coin battery is a second common reason why your nissan gtr key fob Qashqai remote key fob might not work. The batteries typically last between 3-5 years, but they are susceptible to becoming depleted with time, particularly when the fob is frequently dropped. You can replace the battery with a fresh one, but make sure that it's the same size and voltage as the original. If you choose to use an alternative battery, it could cause the key to have an invalid key ID which could prevent it from connecting to your vehicle.

The best way to replace the battery in a nissan ignition key replacement Qashqai key fob is by removing the fob with an incredibly small screwdriver with a flat head. The screwdriver should be put into a small notch on the bottom of your key fob. Simply twist the screwdriver to split the two halves. Remove the old CR2025 battery and replace it with a brand new one, observing the position of the old one in the fob.

Before putting the new battery into place be sure that there isn't any water damage or dirt on the terminals. If this is the case clean the terminals using a small amount isopropyl ethanol. Make sure that the pole cables are connected correctly. They should be connected both the positive and negative poles of your battery.

Troubleshooting

If your Nissan Qashqai's primary fob doesn't function after being exposed to pure rainwater or clean tap water it could be a sign that there's a problem with the internal chip. A battery change won't solve this issue, and you'll have to purchase another key fob. If you dropped the key fob on the ground and it stopped working immediately, this is most likely because it damaged the internal chip. If you clean the chip using isopropylethanol and paper towels and then put it back in the key fob, you will usually get it working again.

One common error you may notice on the dashboard of your car is "Key ID Not Correct." The vehicle is not able to recognize the key fob, and consequently, won't allow the vehicle to start. The problem can be caused by several things, including water damage, undetectable problems in the circuitry of the key fob, or RFID interference.

If the battery that powers 12 volts on your key fob is empty or isn't supplying enough electrical current it will cease to function. This will affect your Nissan Qashqai's keyless system, central locking and the ability to start the engine with the key fob. Check the batteries inside the key fob in case you are unable to lock or unlock your door by hand. You can also try re-inserting the battery to reset the transmitter.

Reprogramming

Unless the key fob has been submerged in salt water and is unable to be restored to its original state after a quick rinse with clean water. You can also clean the electronic chip by using isopropyl or electronic cleaner. If none of these work, it may be time to replace the entire key fob with an entirely new one.

If your Nissan Intelligent Key still does not function, there might be a problem connecting between it and your vehicle. Start by pressing the ignition key, but without initiating the vehicle. Continue this process until the hazard light flashes two times. Then, turn the car off and remove the keys.

Open the fob compartment of your vehicle's fob compartment. This is usually located in the door jamb, on the handle on the driver's side or under the armrest. Find the button that says "program" and press it. After the program is complete you will hear an audible sound.

It's time to test your Intelligent Key to the test. Press all the buttons on the key while standing at a distance from the vehicle. If the lights flash and the horn sounds, it means that the key has been successfully linked to the Nissan. You can also test it close to the nissan key fob programming near me.